Topaz SigWeb Diagnostic

A free test page for Topaz SigWeb signature pad installs. Verifies the SigWeb service is reachable, your pad is connected, and a test signature captures. Run it on the workstation that has the pad attached.

Read the Sigpad Test guide for help reading the verdict or fixing each failure mode.

Privacy: All checks run locally in this browser tab against your SigWeb service on 127.0.0.1 (port 47290 over HTTPS, 47289 over HTTP). No signatures, biometric data, or telemetry are transmitted. View source to verify.

Configuration

Driver: Topaz SigWeb, port 47290 (HTTPS)

Takes about 30 seconds (includes time to sign). No data leaves your machine.

Status Check Step

Pending

Topaz SigWeb service is reachable

Checking SigWebTablet.js and the SigWeb service at 127.0.0.1:47290 (HTTPS).

1 of 3

Pending

Signature pad is connected

Pinging the pad through SigWeb's hardware-test mode.

2 of 3

Pending

A test signature can be captured

Sign on the pad when prompted, then click Done.

3 of 3

Sign on the pad now. Your strokes appear in the box below as you write (most front-desk Topaz pads like the T-S460 have no display of their own; the canvas here is your visual feedback). When you are finished, click Done signing.

This page bundles Topaz Systems' SigWebTablet.js (v1.0.4.0, unmodified) for SigWeb communication. SigWebTablet.js is Topaz Systems Inc. proprietary code, redistributed here as published by Topaz. All other code on this page is licensed under AGPL-3.0-or-later.